Resources

Resources

Department is strong in infrastructure having well-lit-airy, well equipped, highly specious ten laboratories, special departmental library, audiovisual/project room, staff cabins and spacious administrative area and two separate classrooms.

Laboratories

Drives and Power Electronics Laboratory Power System Laboratory

 

PLC and SCADA Laboratory Electrical Measurement & Instrumentation Laboratory

 

Computer Laboratory Electrical Machines Laboratory

 

High Voltage Laboratory Project Laboratory

 

Electrical Machines Lab

Sr. No Item/Description Quantity
01 Distribution board panel, 100A MCCB (L&L Make) 01
02 Rectifier panel 01
03 Motor generator set Compound m/c. coupled to series m/c. 01
04 Motor generator set squirrel cage I. M. m/c. coupled to shunt m/c. 01
05 Motor generator set slip ring I. M. m/c. coupled to Compound m/c. 01
06 Motor generator set squirrel cage I. M. m/c. coupled to shunt m/c. 01
07 Motor generator set slip ring I. M. m/c. coupled to Compound m/c. 01
08 Motor generator set shunt m/c coupled to alternator. 01
09 D.C. shunt m/c with brake arrangement. 01
10 Motor generator set shunt m/c coupled to alternator. 02
11 D.C. shunt m/c with brake arrangement. 01
12 3point Starter 02
13 4point Starter 01
14 Rotor resistance Starter 01
15 Manual Star delta Starter 01
16 Manual Star delta Starter 01
17 Rotor resistance Starter 01
18 3point Starter 02
19 3point Starter 01
20 Static excitation unit 01
21 Static excitation unit 01
22 Static excitation unit (Exciter Motor) 01
23 1ph.Transformer, Pri.: 0-115-199.8-230V, Sec.: 0-57.5-99.59-115V 02
24 1ph.Transformer , Pri.: 0-115-199.8-230V, Sec.: 0-57.5-99.59-115V 02
25 Tachometer (Digital) 01
26 Tachometer (Non-contact Type) 01
27 D.C. Voltmeter (0/150/300V) 05
28 D.C. Voltmeter (0/75/150V) 02
29 A.C. Voltmeter (0/75/150V) 03
30 A.C. Voltmeter (0/300/600V) 06
31 A.C. Voltmeter (0/150/300V) 05
32 Wattmeter (5-10A, 0/150/300/600V) 06
33 Wattmeter (10-20A, 0/300/600V) 03
34 Wattmeter (2.5-5A, 0/150/300V) 03
35 Wattmeter (5-10A, 0/300/600V) 03
36 Wattmeter (1-2A, 0/150/300/600V) 01
37 Wattmeter (1-2A, 0/150/300V) 03
38 A.C. Ammeter (5-10A) 09
39 A.C. Ammeter (2.5-5A) 02
40 A.C. Ammeter (1-2A) 06
41 A.C. Ammeter (10-20A) 05
42 A.C. Ammeter (25-50A) 02
43 D.C. Ammeter (1-2A) 04
44 D.C. Ammeter (5-10A) 02
45 D.C. Ammeter (10-20A) 05
46 D.C. Ammeter (25-50A) 02
47 Frequency meter 01
48 Lamp bank 440v, 10A. 01
49 1 ph. Dimmerstat (230V/5A) 07
50 1 ph. Dimmerstat (270V/10A) 05
51 3 ph. Dimmerstat (440V/10A) 05
52 Clip on Multimeter 01
53 Multimeter ( Black Colour) 02
54 Stroboscope 01
55 Drill m/c. ( K 19.56) 01
56 Soldering gun 01
57 Repulsion Motor 01
58 A.C. Series Motor 01
59 Reluctance Motor 01
60 Linear Induction Motor 01
61 Hysteresis Motor 01
62 Motor Generator set, Single Phase Induction Motor (CSCR) coupled to D.C. Shunt Generator 01
63 1 Induction Motor Capacitor start 1KW, 230V, 1500RPM with DOL Starter 01
64 Rheostat Toshniwal Make – 300 , 1.7 A 06
65 Rheostat Toshniwal Make – 750 , 1.2 A 06
66 Rheostat Toshniwal Make – 1750 , 0.6 A 02
67 Rheostat Toshniwal Make – 1500 , 1.2 A 04
68 Motor-Generator set -Motor: 3-Ph, Auto Synchronous motor, 5HP, 415Volts, 1500RPM,
50Hz,Salient pole -Generator : 3kW, 220Volts, 13.6Amp, 1500RPM, Compound wound -Control
panel for M-G set, Non- contact type digital indicator
01- Set
69 Single phase transformer 1kVA, 230/115Volts with 25%, 50%, 75% tapping on both the
windings
02
70 Single phase transformer 1kVA, 230Volts primary 115Volts , 7.5Volts, 7.5Volts with
three secondary’s enclosed in cabinet
03
71 Three phase transformer – 3kVA, 415/230 volts, all six terminals are taken out on
primary as well as on secondary side.
02
72 Resistive load bank – 3-phase, 415volts, 15Amp, wheels provided for varying of load.
Trolley mounted provided with indicating meters switches and caster wheel for easy
handling.
01
73 Wattmeter (1-2A, 0/150/300V) VMI 02
74 Ammeter (1-2A) MI 04
75 Autotransformer 3 phase,0-470V, Input 415 V AC, 10 A, closed type 02
76 Autotransformer 1 phase,0-270V, Input 240 VAC, 10 A, closed type 07
77 Non Contact type Tachometer 0-10000 rpm 01
78 Digital Tachometer 0-10000 rpm 01
79 Analog Tachometer 0-10000 rpm 02
80 Multimeter (Yellow Colour) 02
81 Variable Frequency Drive with Motor 01
82 Hammering Drill Machine (550w,4000RPM,18MM) 01
83 Rheostat 300Ω, 1.7A 05
84 Rheostat 750Ω, 1.7A 04
85 Lamp bank 440v, 20A. 01
86 3point Starter 03
87 Wattmeter (10-20A, 0-150-300 -600V) 03
88 Wattmeter (5-10A, 0-150-300 -600V) 02
89 Lamp bank 440v, 20A. 01

 

Industrial Drives & Power Electronics Laboratory

Sr. No. Item/Description Quantity
01 C.R.O. 03
02 Variable D.C. power supply 0-30 v. 01
03 SCR Firing Circuit using R, RC, UJT & IC Chip 01
04 SCR Series Inverter 01
05 Jones Chopper with Lamp Load Bank 01
06 IGBT characteristics with DMM 01
07 DIAC Characteristics with DMM 01
08 Single Phase with Half/Full Bridge Converter with Motor 01
09 V/F Control unit MOSFET Based PWM Inverter with Motor 01
10 Duel D.C. Power Supply Unit 01
11 Three Phase Series Inverter with Motor 01
12 Three Phase Bridge Converter with Motor 01
13 Single phase converter fed separately excited D.C. motor R-RL-Motor load 1hp. 01
14 Dual D.C. Power Supply Unit 01
15 Three phase dual converter fed separately excited D.C. Motor R-RL-Motor load 1hp 01
16 Chopper fed DC series Motor. Transistorized DC Chopper Firing unit (230 V/5 A) suitable
to drive Universal Motor load, also RL load.
01
17 VSI Fed three phase Induction Motor to drive 3 phase 1 hp Induction motor from voltage
source inverter fed from 3 ph AC supply through suitable convert
01
18 Firing circuit of 3 phase converter & Converter unit of 3KW to drive variable
speed D.C. motor of 5HP Make:Kashtronika
01
19 Kits to study characteristics of SCR 01
20 Kits to study characteristics of IGBT 01
21 1 Phase Half & Full Controlled Converter 01
22 Digital Multimeter 05
23 Dual D.C. Power Supply Unit 01
24 Power Oscilloscope 03
25 IGBT characteristics study kit 01
26 Charactorstics of SCR,DIAC & TRIC Study kit 01
27 Multimeter 01

 

Analog and Digital Electronics

Sr.No. Item/Description Quantity
1 Analog and Digital Trainer kit XPO CT 10
2 Mag.Elect mag. & Trafo Kit – P1 02
3 DC/AC wave shaping ckt – P2 03
4 Semiconductor, power semiconductor kit –P3 02
5 Sensor and transducer panel- P4 02
6 Voltage regulator kit-P6 02
7 Project module – P10 02
8 Digital logic gate kit-P12 02
9 Flip Flop ,Counter kit –P13 02
10 Multiplexer, decoder panel-P14 02
11 Half/Full adder kit –P15 02
12 Op-amp kit –P16 05
13 Advanced Op-amp kit – P17 05
14 Op- amp application panel-P18 03
15 ADC/DAC kit – P26 02
16 Logic gate specification –P28 02
17 Voltage Regulator using 78XX CR, 79 xx IC 02

 

Control System Lab Microcontroller & Microprocessor Laboratory

Sr.No. Item/Description Quantity
01 8085 Kit Model cub, Microprocessor Trainer Kit 05
02 8085 Microprocessor Kit with Power supply 04
03 8051 Microcontroller Kit with 8 digit seven segment display, SMPS,101 Key PC AT
Keyboard. RS 232 Serial link /cable &PC up/down software & Cross assembler
on floppy
03
04 8255 interfacing card suitable with 8085 with power supply. 05
05 8259 interfacing card suitable with 8085 with power supply. 01
06 8279 interfacing card suitable with 8085 with power supply. 01
07 8253 interfacing card suitable with 8085 with power supply. 05
08 Analog to digital Converter ADC interface using 12 bit 01
09 Digital to Analog Converter 01
10 89C51 Microcontroller Kit 01
11 8 bit ADC interface with 89C51 01
12 8 bit DAC interface with 89C51 01
13 Analog to Digital Converter using 8 bit 0809 01
14 Digital to Analog Converter using 8 bit 0800 01
15 DC motor Control by 89C51 01
16 Stepper Motor Control by 89C51 01
17 8085 Micro processer kit 02
18 89C51 Microcontroller kit 05
19 Stepper Motor &12 V D.C.Motor card. Interfacing card with motors mounted in
it to illustrate speed &direction control
01
20 85C51 Microcontroller Kit with Power supply 04
21 8 bit A/D converter 03
22 Stepper motor control card 05
23 LED Interfacing Card 06
24 Measurement of Temperature Card 06
25 8 bit D/A converter 03
26 DC motor control Card 05
27 Kit of Measurement of Speed using 8085 06

 

Control System Laboratory

Sr.No. Item/Description Quantity
01 PID –Simulator 01
02 PID-Controller 01
03 Potentiometer as error detector 01
04 Rotary Optical Encoder 01
05 Synchro Transistor Receiver Pair 01
06 Educational Analog Computer 01
07 DC servomotor 01
08 Computers 03

 

PLC & SCADA Laboratory

Sr.No. Item/Description Quantity
01 Programming Logic Controller (PLC) with software 20DI & 12DO, 2AI,& 2AO
120/240Volt AC /24V DC, 10K memory PLC SCADA
01
02 Temperature Transmitter /Sensor RTD heater coil set up for temp. monitoring and
control interfacing with available PLC
01
03 Setup for DOL starter and star delta starter operation with MCB, contractors and
overhead protection relay interface with available PLC.
01
04 Computers 03

 

Measurements & Instrumentation Measurement Laboratory

Sr.No. Item/Description Quantity
01 Ammeter(AC 1-2 A) 09
02 Ammeter(AC 2.5-5 A) 14
03 Ammeter(AC 5-10 A) 12
04 Ammeter (AC 10-20 A) 02
05 Voltmeter AC (75-150V) 03
06 Voltmeter AC(300-600V) 05
07 Voltmeter AC(150-300V) 07
08 Wattmeter (2.5/5 A ,150/300) 01
09 Wattmeter (1-2 A ,150/300/600) 02
10 Low Power Factor Wattmeter 01
11 Wattmeter (1-2 A ,150/300/600) 03
12 Current Transformer (5/1 A ,15VA) 04
13 Potential Transformer 03
14 Energy Meter 1 phase 2 wire , static Watthour meter 3200 pulses /KWH 01
15 Earth tester 01
16 Megger 01
17 Energy Meter 01
18 Digital Earth Tester 01
19 Inductive Load Bank 01
20 Capacitive Load Bank 01
21 Energy meter 1ph., 230v, 5A 01
22 Autotransformer 3 Phase ,415 V,8.14 KVA 03
23 Autotransformer 3 Phase ,0-270V 02
24 Stop watch 01
25 Wattmeter (1/2 A, 75/150/300V) 01
26 Wattmeter (5/10 A, 150/300/600V) 01
27 Low Power Factor Wattmeter (2.5/5A, 150/300/600) 02
28 Rheostat 50Ω, 1Amp 05
29 Oil Immersed Resistance 0.1Ω 01
30 Oil Immersed Resistance 0.01Ω 01
31 Wattmeter (10/20 A, 150/300/600V) 02
32 Wattmeter (5/10 A, 150/300/600V) 03
33 Soldering Gun 01
34 Phase Shifting Transformer 01
35 Three Phase Static Energy Meter, 400V, 10A Three Element Type 01
36 Frequency Meter (72X 72) 01
37 Digital Multimeters 02
38 Superposition Kit 02
39 Thevenin’s Kit 02
40 Resonance Characteristic Kit 02
41 Two Port Parameters Measurement Kit 04
42 Step Responses of series RLC series Circuit Kit 04
43 Dual DC Power Supply 02
44 Distribution Board panel 100A MCCB, 32A, 4 Pole MCB 01
45 Kelvins Double Bridge 01
46 Anderson’s Bridge 01
47 Schering Bridge 03
48 Lamp Bank 3 ph,415 V,20 A 01

 

Instrumentation

Sr.No. Item/Description Quantity
01 XY Recorder 01
02 LVDT 01
03 Strain gauge for strain measurement(Cantilever Type ) 01
04 Epstein Square 01
05 LCR Meter 01
06 RTD Probe (Digital )(With heating process) 01
07 Thermistor (Digital) (With heating process) 01
08 Thermo Couple (Digital) (With heating process) 01
09 Pressure Transducer (Digital) 01

 

High voltage Engineering & Material Science

Sr.No. Item/Description Quantity
01 Oil Testing Kit 01
02 Different sets of Electrodes 02
03 Gauss Meter 01
04 High Voltage Testing Unit, oil immersed 0-80Kv, 100mA, 01
05 Vertical Motorized Sphere Gap unit with control Panel 01
06 C and Tan Delta Measuring System 01
07 Megger 1000 V. 01
08 Pin Insulator With Hardware 440V 01
09 11KV. Disc Insulator With Hardware 01
10 11KV. Pin Insulator With Hardware 01
11 Shackle Insulator With Hardware 01
12 Stray Insulator 01

 

Project Lab

Sr.No. Item/Description Quantity
1 Monitor, KEYPAD, C.P.U, MAUS, [Lenovo] 04
2 Monitor, KEYPAD, C.P.U, MAUS, [Lenovo] 08
3 Monitor, KEYPAD, C.P.U, MAUS, [Wipro] 07
4 Monitor, KEYPAD, C.P.U, MAUS,[ IBM] 07
5 HP laser Printer (HP1007) 01
6 DOT Matric (LX300+ Printer) 02
7 DOT Matric (LX300+ Printer) 01
8 HPlaser Printer (HP1007) 01
9 HP laser Printer (HP1007) 01
10 HP Scanjet (2400) 01
11 U.P.S. 05
12 LCD 01
13 LCD 01
14 HP laser Printer (HP1007) 01
15 Digital Camera 01
16 Personal Computers 17
17 Scanner 01

 

Switchgear & Protection / Power System Laboratory Switchgear & Protection Laboratory

Sr. No. Item/Description Quantity
01 ACB(Air Circuit Breaker) 3 Ph.,415 volt,400 amp,<manual fixed type with Shunt
release, Under voltage release (L&T Make)
01
02 Switchgear testing Kit (MDE Make specification) 02
03 Merz-Price protection Kit for Transformer (with solid state % Differential relay)
(MDE Make specification)
01
04 Distance Protection kit for transmission line (MDE Make ) 01
05 µP Based Over Current Protection Kit including CT/PT & Panel board terminals 01
06 Economical Demo Panel For Merz-Price Protection of Alternator 01
07 Direction Over Current Relay 01
08 Timer 01
09 P A System 01

 

Power System-II

Sr.No. Item/Description Quantity
01 Transmission Line model for medium line 01
02 Transmission Line model for Long line 01
03 1 ph. Capacitor bank 230 Volts, 2 amp 01
04 1 ph. Inductor bank 230 Volts, 2 amp 01
05 Phase shifter input 3 ph. , 415 volts output, 2 Amp 01
06 EDSA software 01 User
07 Inductive Load Bank, 1 phase,230Volts ,2A 01
08 Capacitive Load Bank, 1 phase,230Volts ,2A 01
09 Long Transmission Line Panel 01
10 Lamp Bank (3 Phase , 20 Amp) 01

 

Basic Electrical Engineering

Sr.No. Item/Description Quantity
01 Multimeter 03
02 LCD Projector 01
03 Digital Multimeter 01
04 Dual DC power supply unit 02
05 3-Phase Dimmerstat 01
06 (0-500mA) Ammeter, moving coil 03
07 (0-30/60V) D.C. Voltmeter 04
08 (0-100mA) D. C. Ammeter 04
09 (0-500mA) D. C Ammeter 04
10 (0-100/200mA) D. C Ammeter 05
11 (0-1.5/3/7.5V) D.C. Voltmeter 04
12 (0-7.5/15V) D.C. Voltmeter 04
13 (0-15V) D.C. Voltmeter 04
14 (0-15V) A.C. Voltmeter 04

 

Departmental Library:
Department is having separate library consisting highly specialized reference literature like various seminars, project reports, proceedings of national & international seminars & conferences on various technical topics. Library also have transactions of various national & international journals & technical magazines like electrical- power review, EEMA journal. It also includes a number of reference books required frequently & more popularly by for staff and student.

Audio Visual Aids:

Department is having separate OHP(Over Head Projector), LCD (Liquid Crystal Display) & set of different set of CD’s of different manufacturing processes, world leading companies like Siemens, L & T, AREVA etc. which help to focus on practical aspect to aid the theory knowledge gained by the students. Faculty of Department take help of this resource in their theory lectures & impart teaching with the help of modern teaching aids. Separate files of transparencies; Power Point Presentations for different subjects are also available in the Department.